Dexid-200

High performance broad-spectrum disinfectant

  • Composition
  • Contains per ml:
  • Quaternary ammonium compounds
    125 mg.
  • Glutaraldehyde
    50 mg.
  • Isopropanol
    130 mg.
  • Pine oil
    3 mg.

Description

Dexid-200 is based on an optimised blend of glutaraldehyde and quaternary ammonium compounds (QACs) in aqueous solution, and combines the powerful broad-spectrum activity of glutaraldehyde with the soil penetrating, deterging and rapid biocidal capacity of QACs. It is a potent, high performance terminal disinfectant formulated for use in poultry hatcheries, livestock buildings and for disinfecting equipment, boot dips and wheel rinses. Dexid-200 has broad-spectrum activity against bacteria, viruses and fungi of importance in the effective maintenance of animal health and hygiene. It is designed as a terminal disinfectant for use after surfaces have been thoroughly cleaned and rinsed to remove all gross soil. Dexid-200 provides control over pathogenic bacteria, mycoplasma, viruses and fungi and their related diseases, such as Newcastle Disease, Swine Vesicular Disease, Avian Influenza, PRRS, Infectious Bursal Disease (Gumboro), Marek's Disease, Avian Encephalomyelitis, Bacillus cereus, Campylobacter jejuni, Escherichia coli, Klebsiella pneumoniae, Listeria monocytogenes, Mycobacterium smegmatis, Pasteurella multocida, Pseudomonas aeruginosa, Salmonella thyphimurium, Staphylococcus aureus, Cladosporium cladosporioides, Geotricum candidum, Candida spp. and Aspergillus spp.

Indications

Instructions for use:

Animal husbandry housing and hatcheries
- Clean the surfaces with a proper detergent.
- After rinsing and drying, apply Dexid-200 at 0.5% (no specific disease; 1:200) to 1% (disease outbreaks; 1:100) by spraying (ca. 1 l of solution per 4 m2). For fogging use 2 l + 3 l of water for 1000 m3.
- Following the appropriate minimum contact time (typically 20 minutes), areas should be rinsed thoroughly and allowed to dry before animals are returned to the area.

Animal transport trucks and trailers
- Clean trucks and trailers with a proper detergent.
- After rinsing, spray Dexid-200 at 1% (1:100).
- Rinse after at least 20 minutes of contact time
- For wheel rinses apply Dexid-200 at 1%.

Storage and processing rooms for feed and food
- Clean the surfaces with a proper detergent.
- After rinsing, apply 0.5 - 1% Dexid-200.
- Rinse after at least 20 minutes of contact time.

Transport equipment for foodstuffs
- Clean the trucks with a proper detergent.
- After rinsing, apply Dexid-200 at 0.5 - 1%.
- Rinse after at least 20 minutes of contact time.

Boot dips
Dilute Dexid-200 at 1% and renew regularly (every 2-3 days; daily for best results). Dexid-200 is suitable for use on all surfaces including soft metals, is biodegradable and performs well in soft and hard water conditions and in the presence of organic matter. Dexid-200 is suitable for soaking, spraying and fogging applications.

Warning

- Do not apply Dexid-200 in the presence of animals
- Highly flammable liquid and vapour.
- Toxic if swallowed. In case of emergency, wash out mouth with water and give 200 ml of warm water to drink. DO NOT induce vomiting. Seek medical advice immediately.
- Harmful in contact with skin.
- Causes severe skin burns and eye damage. In case of emergency, immediately flood the eye with plenty of water and boric saline solution for at least 15 minutes, holding the eye open. - May cause an allergic skin reaction.
- Causes serious eye irritation.
- Toxic if inhaled.
- May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- May cause drowsiness or dizziness.
- Very toxic to aquatic life.
- Personal protective equipment, such as gloves, masks and eye protection, should be worn during the mixing or application of Dexid-200.
- Keep out of reach and sight of children.
- Containers should be rinsed with clean water and disposed of in line with local regulations.

Packaging

Bottle of 1 litre and jerrycan of 5 litres.

Product Code:

MDD2
[profiler]
Memory usage: real: 15728640, emalloc: 15350888
Code ProfilerTimeCntEmallocRealMem